Cultibox Light + 1.0 x 1.0 x 2.0 m.

𝗔𝗥𝗠𝗔𝗥𝗜𝗢 𝗖𝗨𝗟𝗧𝗜𝗕𝗢𝗫 𝗟𝗜𝗚𝗛𝗧 + 𝟭,𝟬 𝘅 𝟭,𝟬 𝘅 𝟮,𝟬 𝗺

𝗖𝗔𝗥𝗔𝗖𝗧𝗘𝗥𝗦𝗧𝗜𝗖𝗔𝗦 𝗣𝗥𝗜𝗡𝗖𝗜𝗣𝗔𝗟𝗘𝗦

• Sturdy, lacquered steel frame with approximately 16 mm thick tubes and heavy-duty corner braces for a firm, long-lasting installation.
• Robust, opaque outer fabric; diamond-shaped reflective Mylar interior to maximize light and improve crop yield.
• Optimized dimensions 1.0 x 1.0 x 2.0 m: ideal balance between usable space, discretion and ease of handling.
• 1 large, full-access front door with sturdy zippers and interior flaps that block light leaks.
• Removable watertight tray at the base to contain spills and facilitate cleaning.
• Inlets and outlets with adjustable air intake/extraction vents; separate cable management; and ventilation windows with insect-proof mesh.
• Reinforced top bars for securely hanging the carbon filter, extractor fan and light fixture (recommended total load up to 20 kg).
• Quick, tool-free assembly and high compatibility with full-spectrum LED or HPS/CMH equipment.
• Completely light-tight interior and prepared to work with a carbon filter for odor control.
• Ideal for 4 to 9 plants depending on pot size and growing technique (SOG/SCROG).

𝗜𝗡𝗧𝗘𝗥𝗜𝗢𝗥 𝗜𝗡𝗧𝗘𝗥𝗜𝗢𝗥 𝗘𝗫𝗧𝗘𝗥𝗜𝗢𝗥 𝗠𝗧𝗢𝗗𝗢𝗦 𝗖𝗨𝗟𝗧𝗜𝗩𝗘 𝗜𝗡𝗧𝗘𝗥𝗜𝗢𝗥

• Indoor use
• Recommended for growing in a cabinet with 300–480 W LED or 400 W HPS, with adequate extraction and carbon filter.
• Compatible with soil, coco or compact hydroponic/aquaponic systems.
• Efficient setups: SCROG with 4–5 plants and mesh, or SOG with 9 small pots for fast cycles.
• Outdoor use
• Not recommended. This cabinet is designed for controlled indoor environments; its fabric, zippers, and ports are optimized for indoor use and may deteriorate outdoors due to moisture, direct sunlight, or wind.

𝗣𝗥𝗢𝗣𝗜𝗘𝗗𝗔𝗗𝗘𝗦

• Reflectivity and performance
• The textured Mylar interior promotes even light distribution, reducing shadows and hot spots, resulting in greater crop efficiency and homogeneity.
• Environmental control and discretion
• The light-tight structure, mesh windows, and exhaust ports allow for precise control of temperature, humidity, and odors with the right equipment.
• Ergonomics and maintenance
• Full front access and a removable watertight tray keep your grow room clean and secure. Quick assembly and disassembly for relocation or deep cleaning.

𝗙𝗜𝗖𝗛𝗔 𝗧𝗖𝗡𝗜𝗖𝗔 𝗗𝗘𝗟 𝗣𝗥𝗢𝗗𝗨𝗖𝗧𝗢

• Product: Cultibox Light + 1.0 x 1.0 x 2.0 m cabinet

• Brand/Series: Cultibox Light +

• Dimensions: 100 x 100 x 200 cm (L x W x H)

• Useful volume: approx. 2.0 m³

• Structure: lacquered steel tubes, approx. Ø16 mm, with reinforced corners

• Outer canvas: high-strength opaque fabric

• Inner lining: Textured reflective Mylar (diamond effect)

• Interior reflectivity: high (optimized for cultivation with artificial lighting)

• Access: 1 large front door with sturdy zippers

• Ventilation ports: upper and lower with adjustable cuffs for extraction/intraction

• Cable glands: 1 independent port for electrical wiring

• Passive ventilation: windows with anti-insect mesh

• Tray: removable watertight base for collecting spills

• Ceiling bars: for hanging filter/extractor/lighting

• Recommended load capacity (total roof): up to 20 kg

• Filter compatibility: typical Ø100–150 mm (depending on equipment)

• Recommended lighting: LED 300–480 W or HPS 400 W (with adequate extraction)

• Use: indoor plant cultivation, cuttings, growth and flowering

• Weight: 7 kg

• Assembly: tool-free, guided by included instructions

• Category: Cabinets 0.40 m to 1.00 m

𝗣𝗥𝗘𝗚𝗨𝗡𝗧𝗔𝗦 𝗙𝗥𝗘𝗖𝗨𝗘𝗡𝗧𝗘𝗦

i What lighting equipment is most suitable for this cabinet?

For 1 m², a good efficiency 300–480 W LED or 400 W HPS with proper cooling and extraction provides optimal coverage.

i How many plants can I grow inside?

Between 4 and 9 plants, depending on the pot size and technique: SCROG with fewer plants and large pots, SOG with more plants and small pots.

Is it light and odor resistant?

The closet blocks out light; for odor control, a charcoal filter connected to a suitable extractor should be used and negative pressure maintained.

i Can I hang the filter and extractor from the ceiling?

Yes, it includes reinforced upper bars. Don't exceed the recommended total load of 20 kg and distribute the weight evenly.

Is it suitable for hydroponics?

Yes. It is compatible with compact hydroponic systems as long as drainage in the watertight tray and humidity are controlled.

i How do you clean and maintain it?

Use a soft cloth with warm water and mild soap indoors and outdoors. Dry thoroughly before reuse. Avoid harsh chemicals.

Is it complicated to assemble?

No. It's assembled without tools using the rod and corner bracket layout. Assembly is typically completed in minutes.

i Can it be used outdoors (terrace, garden)?

Not recommended. It is designed for indoor use. Exposure to the elements shortens its lifespan and can compromise the crop.

What extraction do I need?

It depends on the light output and ambient temperature. As a guideline, for 1 m³ of cabinet, the goal is to renew the air several times per minute; an extractor fan with an adequate effective flow rate and a 100–150 mm diameter filter is usually sufficient.

i Does it accept accessories such as pulleys or SCROG mesh?

Yes, you can install light fixture/filter pulleys and attach a SCROG mesh to the structure to optimize space and production.